Site Information

Measure Instructions


Measuring Instructions

Comfortex accepts measurements down to 1/8 inch increments.Measurements with 16 inch increments will not be accepted.

Inside Mount

Use a steel tape to measure the opening at three different places, & use the narrowest dimension when ordering.Be Exact! The factory will make the shade 3/8 inch narrower so it will not rub against the window casing. Measure the height of the window from the top (soffit) down to the still.

Outside or Ceiling Mount

Use a steel tape to measure the exact height & width of the area to be covered. It is recommended that the shades overlap the window by at least 1.5 inch on each side. When installation has no sill, allow the shade to overlap the bottom of the window casing by at least 1.5 inch.

Wow Blinds ©Copyright 2021 Wow Blinds